Моля изберете Вашият сайт по подразбиране





The meter is suitable both for setting up and for continous flow measurement. It is intended for permanent installation and must therefore be specified at the design stage.


The meter consists of a regulating shutter and a centrally located measurement plate. Each measurement nozzle has a removable plastic plug which prevents dirt from entering. It also eliminates air leakage when measurement is not done.

The unit permits insulation of up to 50 mm thickness to be installed without concealing the measurement nipples or the label plate.

The plate can be rotated for best legibility, irrespective of the way the unit is installed and can easily be removed, to be located away from the unit.
The cup around the damper knob allows insulation up to 50 mm thick to be used. If thicker insulation is needed, add the special insulation cup IK.
The unit has components which partly block the duct system. You can use one of the tips on page page * to facilitate cleaning.


  • Short installation length.
  • Suitable for use with insulation.

Подобни документи

1 Софтуер