Revit families for Autodesk Revit 2016

Our latest Revit families are now available for download. Fill out the form at the bottom of the page to get access to download

Sliding Protection

There are three different sliding protection products available; GLS, GLSF and GLSRP.

Safety rail system

The safety rail system is built up using consoles, fastening plates, posts and pipes.There are three different types of systems; L-shaped, U-shaped and O-shaped.

Anchorage point

The anchorage point is available as a smart object. They consist of an anchorage point and a fastening plate.

Ridge rail system

The ridge rail system is available as a smart object. It is built up using consoles, fastening plates, pipes, end sleeves and support consoles.

Snow fence systems

The snow fence systems are available as smart objects. The pipe system is built up using consoles, fastening plates, pipes, end sleeves and support consoles. The grid system is built up using consoles, fastening plates and grids.

Gutter systems

Gutters in 100, 125, 150 and 190 dimension available as smart objects. They consist of a gutter with optional gutter accessories on the left and right side of the gutter.

Downpipe systems

Downpipes in 75, 87, 100 and 120 dimension available as smart objects. They consist of a downpipe with a nozzle, bends and different outlet options.

Gutter accessories

Gutter accessories such as brackets, stop ends and gutter joints in both 3D and 2D.

Gutters

R is a half round gutter that is available in 4 different sizes; 100, 125, 150 and 190. It is available in 10 different colors, copper and magestic.

LHP 115

LHP 115 is a decking profile for insulated roofs. The profile has a covering width of 735 mm and its load bearing capacity is optimized for lower loads and spans up to 7200 mm.

LHP 130

LHP 130 is a decking profile for insulated roofs. The profile has a covering width of 945 mm and its load bearing capacity is optimized for higher loads and gives an effective installation due to its covering width.

LHP 200

LHP 130 is a decking profile for insulated roofs. The profile has a covering width of 945 mm and its load bearing capacity is optimized for higher loads and gives an effective installation due to its covering width.

LLP 20

LLP20 is a roof and wall profile with a covering width of 1000 mm. Except for roof and wall applications, it is also used in floor decks in a galvanized appearance.

LTP 20

LTP20 is a roof profile with a covering width of 1035 mm.

LTP 45

LTP45 is a roof profile with a covering width of 900 mm.

LTP 115

LTP115 is a roof profile with a covering width of 735 mm. Its load bearing capacity is optimized for spans up to 7200 mm and it is commonly used for cantilever roofs.

TR 35

TR35 is a roof profile with a covering width of 1000 mm.

Kotolock 25

Kotolock is a seam roof profile with a covering width of 500 mm.

SRP 25

SRP 25 is a seam roof profile with a covering width of 500 mm.

SRP 25D

SRP 25D is a seam roof profile with a covering width of 500 mm. It has two design grooves that differs it from the SRP25 profile.

C-purlin

C-purlins can be used in all types of industrial buildings, both insulated and non-insulated. It is available in a lot of different sizes and thicknesses and it can be used in walls, roofs and floor decks.

U-purlin

U-purlins can be used in all types of industrial buildings, both insulated and non-insulated. It is available in a lot of different sizes and thicknesses and it can be used in walls, roofs and floor decks.

Z-purlin

Z-purlins can be used as a secondary load bearing system on all types of industrial buildings, both insulated and non-insulated. They can be used both on walls and roofs and are available in a lot of different sizes and thicknesses.