Minivent - Ducted Bath/Shower Fan Kit



The Vent-Axia Minivent ducted bath/shower kit includes all the components necessary to install a ducted 100mm system in one box. This simplifies fitting of an efficient ventilation system to small rooms, including bath and shower rooms and WC's. It is especially suitable for en-suite bathrooms.

The fan kit has ample performance to meet the Building Regulations Requirements for WC's. The timer version should be used for internal rooms.

The kit consists of a Minivent IP44 In-Line fan, a white ceiling grille and spigot, 3 metres* of flexible duct and an external louvre for soffit or wall mounting. The duct should be cut to the required length and the bend radius kept to a maximum to provide the best fan performance.

Enclosed terminal compartment, Class 1 earthed appliance.
Supply voltage 220-240/1/50Hz.


Built-in Controls

Timer Model
15 minute overrun timer complies with Building Regulations Document F. The timer is triggered by the lighting circuit. Pre-wired for easy installation.

Product Specification

Model Stock Ref. No. m³/h l/s Watts dB(A) @ 3m
VA Minivent SK 24 87 10A 110 30 20 37
VA Minivent SKT 24 88 10A 110 30 22 37





A ØB C (Timer)
mm 80 98 115



Typical Specifications

Supply and install a Minivent in-line ducted fan kit including white ceiling grille and spigot, 3 meters of flexible ducting and an external louvre as manufactured by Vent-Axia Ltd, Fleming Way, Crawley, West Sussex, RH10 9YX, Telephone: 01293 526062.

When installed the fan performance should meet the Building Regulation (Document F) requirements.

The motor should be manufactured with self aligning sleeve bearings and be fitted with Standard Thermal Overload Protection (S.T.O.P.) the motor should be insulated to Class B.

Minivent SK via light switch
Minivent SKT via light switch timer overrun facility


There are no softwares available for download for this particular product.