SDX - EuroFlow In-Line Centrifugal Fans

Description

Overview

The New “SDX” Euroflow in-line centrifugal duct fans shall be as supplied from Roof Units, designed around an efficient backward curved centrifugal impeller and external rotor motor, to ensure a compact design, high performance and low sound levels.

The in-line fan shall be constructed from steel and incorporate an aerodynamically designed airflow guide vane, ensuring maximum performance from the unit. All models are to have 25 or 30mm inlet and discharge spigots, for ease of installation and shall come complete with mounting feet for horizontal or vertical mounting.

Euroflow shall be available in twelve models, sizes 100, 125, 150, 160, 200, 250 & 315mm diameter, with sizes 150 to 315 available as a standard or high performance in-line centrifugal duct fan. The range shall provide a performance from 0.01³/s to 0.435m³/s with a maximum pressure development of up to 500 Pa.

Impellers

The impellers shall be aerodynamically designed centrifugal backward curved type, manufactured from steel or polyamide. The motor and impeller shall be factory matched, statically and dynamically balanced in two planes to ISO 1940, Grade G 6.3.

Motors

All sizes from 100 to 315 shall be protected to IP44 in accordance with BS EN 60529:1992. With motor insulation Class B, suitable for operating temperatures from -15°C to +40°C and atmospheres up to 95% RH. The range shall incorporate maintenance free external rotor motors, fitted with sealed for life ball bearings, ideally suited for speed control by electronic or voltage reduction. The motors shall be wound to suit a 230V/1PH/50Hz electrical supply, with all motors permanent capacitor type to optimise efficiency. HOT SPOT protection by means of a thermal contact switch incorporated within the windings shall be provided to prevent motor damage due to overloading/overheating.

Terminal Box

An IP44 terminal box shall be supplied with all models with 20mm entry.

Performance

The fan performance shall be in accordance with tests to BS848 Part 1 1980, with the fan sound levels measured in a reverberant chamber in accordance with BS848 Part 2 1985.

Quality Assurance

Design and manufacture shall be in accordance with the standard for quality management systems BS EN ISO 9001:1994.

Accessories

A full range of accessories are available with the Euroflow in-line centrifugal duct fans such as:

• Electronic Speed Controllers
• Auto Transformer Speed Controllers
• D.O.L. Starters
• Pre & Secondary Filter Cassettes
• Electric Heater Batteries
• In-Line Attenuators
• Backdraught Shutters
• Fast Clamps
• Flexible Ducting
• Wall Terminals
• Roof Terminals

Model Range

 
Euroflow - SDX In-Line Centrifugal Duct fan - 100mm Diameter
Specification:
  • 100mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX100B
 
 
 
44 in stock £97.94 (incl. VAT)
 
Euroflow - SDX In-Line Centrifugal Duct fan - 125mm Diameter
Specification:
  • 125mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX125B
 
 
 
87 in stock £97.94 (incl. VAT)
 
Euroflow - SDX In-Line Centrifugal Duct fan - 150mm Diameter
Specification:
  • 150mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX150B
 
 
 
341 in stock £100.00 (incl. VAT)
 
Euroflow - SDX In-Line Centrifugal Duct fan - 200mm Diameter
Specification:
  • 200mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX200B
 
 
 
40 in stock £121.42 (incl. VAT)
 
Euroflow - SDX In-Line Centrifugal Duct fan - 250mm Diameter
Specification:
  • 250mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX250B
 
 
 
150 in stock £126.52 (incl. VAT)
 
Euroflow - SDX In-Line Centrifugal Duct fan - 315mm Diameter
Specification:
  • 315mm diameter
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX315B
 
 
 
99 in stock £202.01 (incl. VAT)
 
Euroflow - SDX High performance In-Line Centrifugal Duct fan - 150mm Diameter
Specification:
  • 150mm diameter, High performance
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX150HB
 
 
 
74 in stock £120.38 (incl. VAT)
 
Euroflow - SDX High Performance In-Line Centrifugal Duct fan - 200mm Diameter
Specification:
  • 200mm diameter, High performance
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX200HB
 
 
 
137 in stock £157.12 (incl. VAT)
 
Euroflow - SDX High performance In-Line Centrifugal Duct fan - 250mm Diameter
Specification:
  • 250mm diameter, High performance
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX250HB
 
 
 
154 in stock £161.21 (incl. VAT)
 
Euroflow - SDX High Performance In-Line Centrifugal Duct fan - 315mm Diameter
Specification:
  • 315mm diameter, High performance
  • Motor Insulation Class B, protected to IP44
  • Operating Temperatures from -15°C up to +40°C
  • HOT SPOT Protection
  • Suitable for speed control using electronic or Voltage controller
  • Quality Assurance to BS EN ISO 9001:1994
  • Performance tested to BS848 Part 1 1980
  • 2 Year Warranty.
Stock Ref No: SDX315HB
 
 
 
128 in stock £226.51 (incl. VAT)

\

Dimensions


Size C D E F G H Weight kg
SDX100 100 237 204 25 25 42 270 294 3.5
SDX125 125 237 193 25 25 42 270 294 3.8
SDX150 150 278 195 25 25 42 312 350 3.6
SDX200 200 333 210 25 25 42 374 402 5.1
SDX250 250 333 210 29 29 42 380 430 4.9
SDX315 315 402 265 25 30 42 450 485 7.8

 




 

There are no softwares available for download for this particular product.