Lindab GreenCoat PLX Pro BT

Previous Next

Image 1/16

Description

Lindab GreenCoat PLX Pro BT is an extra soft tinsmith quality with practically no spring back allowing tight seams to be achieved. Lindab GreenCoat PLX Pro BT can be hand seamed or machine seamed.
 

Why Use Lindab GreenCoat PLX Pro BT

  • ​Patented, bio-based colour coating
  • High colour retention and long-lasting finis
  • Wide colour range
  • Batch-to-batch colour consistency
  • Lindab GreenCoat products have one of the best steels available on the market in the substrate
  • They have the only coatings on the market with a high bio-renewable content.
  • Fully compliant with REACH regulations
  • Extensive guarantees and performance
  • They allow for greener living due to their reduced environmental impact
  • Reduced maintenance
  • Year round installation is possible as it can be formed at temperatures below zero
  • Complex shapes can be created as Lindab GreenCoat can be pressed, cut, bent, profiled and punched
  • Lindab GreenCoat has withstood rigorous outdoor testing.

Lindab GreenCoat PLX Pro BT matt

 

Warranty time (years)

20 zone 1/15 zone 2

Corrosion resistance

RC5

UV-resistance

Ruv3

Scratch resistance

35 N

Minimum inner bending radius (Formability)

1.5 x sheet thickness

Gloss range: matt/semi gloss/glossy

10

Stain resistance

Very good

Coating thickness

36um

 

Lindab GreenCoat PLX Pro BT Material ​

Coated with 350g zinc per m2 and double side, PLX has 25 micron of zinc on each side. GreenCoat is a patented concept for organic coating and a registered trademark by SSAB.

Product

Base Material

Yield Strength

Steel Thickness

PLX Z350

DX54 according to

EN 10346:2015

Approximately

180 N/mm2

0.6±0.06mm

 

Lindab GreenCoat PLX Pro BT, Mild Steel Corresponding to EN 10346

European standard designation

Yield strength, min Rp0,2 N/mm2

Tensile strength, min RmN/mm2

Elongation

A801% min

Zinc coating (g/m2)

-

120

-

36

350

1)        For t0.70mm applies to units lower value

There are no softwares available for download for this particular product.

​Lindab GreenCoat PLX Pro BT Technical Properties 

Technical Properties

Regular

Matt

Gloss

40

10

Minimum inner bending radius

1.5 x sheet thickness

1.5 x sheet thickness

Scratch resistance

35 N

35 N

Lowest forming temperature

-150C

-150C

UV radiation resistance

RUV3

RUV3

Corrosion resistance

RC5

RC5

Stain resistance

Very Good

Very Good

Highest operating temperature

1000C

1000C

Fire classification

A2 s1 d0

A2 s1 d0

Coating thickness, nominal

36um

36um

Primer thickness, nominal

10um

10um

Coating structure

Structured

Structured

Steel designation – European Standard

EN10346 DX52D

EN10346 DX52D

Yield strength RP0.2, min value

160 MPa

160 MPa

Tensile strength Rm, min value

320 MPa

320 MPa

Elongation A80, min value

41%

41%

Zinc Coating

350 g/m2

350 g/m2

Min steel thickness*

0.6mm

0.6mm

Steel width*

1000 – 1500 mm

1000 – 1500 mm

 

Working Temperature of Lindab GreenCoat PLX Pro BT

​According to tests done, Lindab GreenCoat PLX Pro BT can be machine seamed without the appearance of micro cracks down to a steel temperature of -100C and the maximum working temperature is 1000C. 

Environment

Containing roughly 20% recycled material Lindab GreenCoat PLX Pro BT is completely chrome free and parts of the solvents are from bio-based material.