Solo Plus

Solo Plus

Description

Solo Plus Features and Benefits

  • Filterless - no need for a filter due to its innovative impeller design
  • Extremely low sound levels
  • Adjustable rear or side exit spigot
  • Flush or surface mountable
  • Suitable for wall, ceiling and panel mounting
  • Meets current Building Regulations Approved Documents F & L requirements for domestic bathrooms and toilets
  • IPX4 rated

 

 

Bathroom and Toilet Ventilation

Specially designed for through the wall and ducted applications, the Solo Plus range from Vent-Axia is suitable for internal bathrooms, toilets and other small rooms. The Solo Plus is finished in white and can be flush or surface mounted using a 100mm circular spigot for rear entry or connecting to a vertical ducting system. The spigot of the Solo Plus range can also be adjusted for side ways exhaust. The side ways exhaust enables recessed ceiling installations within limited ceiling voids. The powerful centrifugal impeller of the Vent-Axia Solo Plus range allows for installations with longer duct runs using 100mm ducting yet still achieves 15 l/s as required by Document F of the current Building Regulations.

 

The Solo Plus has a choice of two boost/override motor speeds, medium (17l/s) or high (22l/s), these speeds are set at installation. The Solo Plus has an optional constant trickle speed (9l/s) which is also selectable at installation, except in the P model. The fan will switch from trickle (if selected) to boost (medium or high) depending on the model, via the pullcord/ light switch/humidity sensor/PIR.

 

All models of the Solo Plus can be wall, panel or ceiling mounted and can be connected to either circular, rectangular or Vent-Axia’s flat ducting. The electrical components enclosure is manufactured from flame retardant grade material. Supply voltage 220-240V/1/50Hz.

There are no softwares available for download for this particular product.

Available Models

 

 

 

 

SOLO PLUS P (Pullcord)

 
  • Flush or surface mountable
  • Control by pullcord single speed
  • 1 of the 3 speeds selectable at installation
 

 

 
 
 

 

 
 
 

 

 
 
 

 

 
 
 

SOLO PLUS T (Timer)

 
  • ​​Flush or surface mountable
  • Constant trickle option
  • 2 Speed
  • Adjustable timer overrun
  • Delay on timer option
 

 

 
 
 

 

 
 
 

 

 
 
 

 

 
 
 

SOLO PLUS TM (Timer/PIR)

 
  • ​Flush or surface mountable
  • Control by integral PIR detector
  • Constant trickle option
  • 2 Speed.
 
 
 

 

 
 
 

 

 
 
 

 

 
 
 

SOLO PLUS HT (Humidistat/Timer)

  • ​Flush or surface mountable
  • Humidity controlled fan
  • Override pullcord
  • Constant trickle option
  • Adjustable timer overrun
  • Delay on timer option
  • Adjustable humidity sensor