The damper DIRU with flow meter offers measurement of the air flow. DIRU has following characteristics: low noise level, centric flow, fixed measurement nozzles for accurate flow measurement and is equipped with regulating facilities which can be fully opened, which means that you do not need cleaning covers. It fulfils tightness class C.
The dimensioning graph are to be used to determine the pressure drop over the damper with flow meter and to give information regarding the sound effect level at different settings. When balancing the system the balancing graphs should be used.
There is a separate assembly, measuring, balancing and maintenance instruction for dampers with flow meter.
The damper blades forms a measuring flange which allows flow measuring. By measuring the pressure difference between the measure nozzles, you can through the equation on the damper derive the flow q [l/s]. The setting value of the damper and the correction factor (k-factor) is the same number which means that you do not have to read a graphs in order to get the k-factor from a setting value.
The air flow is regulated with a handle.
Ø 80–630 fullfills pressure class A in closed position.
The damper is made of hot-dip galvanized sheet steel.
Consider required straight distance after or before disturbance, as mentioned on the card attached to the measurement nozzles, to obtain accurate flow measurement.
By fully open the damper, one get access to the duct. Do not forget to readjust the damper after cleaning.