Damper with flow meterFMDRU
The flow meter is suitable both for setting up and for continous flow measurement. It is intended for permanent installation and must therefore be specified at the design stage.
There is a separate assembly, measuring, balancing and maintenance instruction for this product.
Ø 80–630 fullfills tightness class 0 and pressure class A .
The flow meter consists of two reducers joined together, with measurement nozzles. Each nozzle has a removable plastic plug which prevents dirt from entering. It also eliminates air leakage when measurement is not done.
The unit permits insulation of up to 100 mm thickness to be installed without concealing the measurement nozzles or the label plate. The plate can be rotated for best legibility, irrespective of the way the unit is installed and can easily be removed, to be located away from the unit.
The unit also contains a regulating damper DRU to allow balancing. The cup around the damper knob allows insulation up to 50 mm thick to be used. If thicker insulation is needed, add the special insulation cup IK.