KFLGutter bracket fixed long

KFL is a gutter bracket with a long shank that is fitted to roof boards. The gutter is snapped into place between the hook’s front and rear brackets.

The hook must be bent to the correct length and angle on site using a bracket bender.

The hook has been tested and approved in Class H (750 N) in accordance with SS-EN 1462:2004.

Material
Steel.

Care instructions
Coated steel components should be inspected on a regular basis. If any damage is detected in the surface coating, it must be repaired to ensure the product’s long-term durability. Immediately after installation, all loose objects, such as pieces of sheet metal, drill shavings and other metal debris, must be removed. Check that the roof drainage is clear. Debris and dirt keep the sheet metal damp and pose a risk of corrosion. If necessary, the product can be washed using a soft brush, water and a pH-neutral cleaning agent. Do not use solvents.

Environment
The product is 100% recyclable and should be sorted as scrap metal.

Handling/storage
The product must be kept dry during storage. Never cut the product with an angle grinder – use cutting tools or a hand-held metal saw for processing. Be sure to remove any metal shavings.