LBXRTD2Smoke Bend

Bend with rounded outer corner. Trapeze corrugations stiffen the duct and reduce the risk of noise generation. Pre-wrapped 27 mm black insulation insulates the outside of the product.

The bend comes with 90° or 45° angles and has joining profiles of 30 mm flange at both ends.

Standard design l₁ = l₂ = 125 mm.

Other leg lengths and angles are also available.

The guide vane is an extra accessory and must be ordered on request.

The product is CE marked according to EN 12101-7 and used in a rectangular smoke control system – multi compartment (see Declaration of Performance).

Classification according to EN13501-4

Classification according to EN13501-3