Skip to main content
Lindab Logo
Choose languge

MINKA-AOpenable duct attenuator with removable baffles

MINKA-A is an openable duct attenuator in galvanized.

Steel with splitters filled with mineral wool attenuation material. Wool is covered with fleece to prevent fibres coming out to the airflow. Splitters are removable for cleaning or replacement.

Bigger attenuators are reinforced by an outer modular frame.

Attenuator is equipped with joining profile LS1, RJFPC3 20, RJFPC3 30 or RJFPC3 40.

Attenuators can also be ordered with splitters protected by perforated plate.

Additional thermal insulation 50 mm (LE50) or more and fire insulation available on request.

To size the appropriate attenuator you can use our IT-online tool LindQST, where splitter distance, length and height can be optimized for the best performance.

Tested according to ISO 7235 standard.

For special material and sizes, please contact to Lindab sales.

MINKA attenuator comes in two models. Non-openable MINKA and openable, fully cleanable MINKA-A.

The casing length of DACKA-A is 150 mm longer than MINKA with the same splitter length.

Show image-nr0
CharacteristicValue
Show image-nr0